Classiel
Adjusting the number of rotation of the classification rotor and
classification air volume from the guide vane, Classiel can easily control the
sizes of classified particles in a wide range from submicron to several hundred
μm. It can efficiently classify powders even at the capacity of
several kg to ton/h.
Feature
- Sizes of classified particles can be easily controled in a wide range from
submicron to several hundred micron by adjusting the number of rotatin of the
classification rotor and air volume.
- Even at the capacity of several kg to ton/h, efficient classification is
possible at the absolute collection rate of 60 - 90% for the particles which
sizes are less than the target.
- Due to its sharp classification, Classiel can be used in a wide range of
high-function powder fields. It also can be used as an alternative for a
sieving system to improve maintenacability and productivity.
- It can classify fine powders with just a few foreign powders. The pass
efficiency of a 44μm sieve in classification of ultrafine calcium carbonate
powders is better than 99.999% without an auxiliary aid.
- There are various models of classiels with various capacities. They
are compact so that installation planning and work are easy.
- Abrasion and adhesion resistance is considered sufficient in the
structural and material perspectives to withstand severe operational
conditions.
Application
- Mineral fillers(calcium carbonate, dolomite, tarc, etc.)
- Ceramic materials(feldspar, crystal, zircon, wollastonite, etc.)
- Fine powders for fine ceramics
- Fly ash, silica sand, special cement, gypsum
- Resin, cemical products
- Drugs, foods, peticides
- Metal
- Other high-function powders
Specification
Model |
Classification Air
Volume
(m3/min) |
Capacity
(t/hr) |
Classification Diameter
(μm) |
Rotation
(rpm) |
Motor Capacity
(kW) |
Standard Outside Dimension(mm) |
A |
B |
C |
D |
N-20 |
20 |
0.1-3.0 |
3-400 |
-6000 |
3.7-7.5 |
600 |
720 |
450 |
360 |
N-50 |
50 |
0.3-7.5 |
3-400 |
-4100 |
5.5-15 |
800 |
1050 |
500 |
470 |
N-80 |
80 |
0.5-12.0 |
3-400 |
-3400 |
11-22 |
1000 |
1220 |
600 |
570 |
N-100 |
100 |
0.6-15.0 |
3-400 |
-3100 |
15-30 |
1100 |
1350 |
660 |
640 |
N-150 |
150 |
0.9-22.5 |
3-400 |
-2650 |
22-45 |
1260 |
1550 |
670 |
760 |
N-250 |
250 |
1.5-37.5 |
3-400 |
-1950 |
30-75 |
1600 |
1800 |
900 |
900 |
N-500 |
500 |
3.0-75.0 |
3-400 |
-1250 |
45-90 |
2180 |
2200 |
1250 |
1080 |
N-2000 |
2000 |
-300 |
3-400 |
-920 |
200-315 |
3680 |
3970 |
2020 |
2010 |